HomeMarantzSR6011
Marantz · SR6011

Marantz SR6011: restore Internet Radio

The Marantz SR6011 (9.2-channel AV receiver, 2016) shows “radiomarantz.com”, a Server error, or an empty Internet Radio list because the vTuner directory it used became unavailable. Change one DNS setting and the station list returns.

Why it stopped

The list didn’t break — its directory did

The SR6011 is a pre-HEOS Marantz (the HEOS generation begins at the SR6012). Its Internet Radio was powered by vTuner via radiomarantz.com, so it is fully supported. The receiver, your network and its streaming are all fine; only the browsable station directory went away when vTuner became unavailable. Retune·FM answers in its place.

The fix

Step by step on the SR6011

About two minutes. You change one value — the DNS server — and nothing else on your network changes.

Primary DNS address
62.132.3.28
SR6011Press SETUP on the remote → Network → Connection → set “IP Address = Manual” → leave IP address, subnet mask and gateway unchanged → set Primary DNS to 62.132.3.28Save → open Internet Radio.
💡 Do not change the IP address, subnet mask or gateway — only the DNS field. Enter it on the receiver itself so the rest of your network is untouched.
Check it worked

Confirm stations are back

Power the SR6011 off and on (or reconnect it to the network), then open Internet Radio / NET RADIO. The list should come alive. Still empty? Re-check the DNS value and that the receiver gets its address settings from your router. To undo everything, set the IP setting back to Automatic.

FAQ

SR6011 — common questions

How is the SR6011 different from the SR6012?

The SR6012 moved to the HEOS platform and doesn’t need this. The SR6011 stayed on vTuner — which is why its Internet Radio stopped and why Retune·FM restores it.

Wi-Fi or wired — does it matter?

No. Set the DNS under Network → Connection for whichever connection you use.

How do I revert?

Set “IP Address” back to Automatic.