Internet radio · restored

Your receiver's radio,
back on air.

When the vTuner directory shut down, thousands of Denon, Marantz and other Hi-Fi receivers lost Internet Radio. Retune FM brings the full station list back — inside the receiver's own menu.

What happened

The station list didn't break. Its address disappeared.

Your device used to ask a company's server for the station directory. That service was discontinued, so the receiver keeps calling a number that no longer answers — and the list shows up empty. Retune FM simply gives it a new, working address.

How it works

Three steps, about two minutes.

You change exactly one setting on the receiver — its DNS server. Everything else stays as you remember it.

01Set

Enter the DNS

Open the receiver's network settings and put the Retune FM address below as the primary DNS.

02Open

Internet Radio

Go to Internet Radio in the menu, exactly as before. The directory loads again.

03Play

Press play

Browse by genre, country or language. Streams play straight from the stations.

Primary DNS address
62.132.3.28
Where do I type it? ↓
Compatibility

Will it work with your device?

Type your model. If it used the old vTuner directory, Retune FM speaks its language.

Not supported this way (they moved to a different service): Denon/Marantz from 2016 with an “H” in the name (AVR-X1400H and later, SR5012/6012/7012…); Yamaha MusicCast; Onkyo/Pioneer from 2016 (TX-RZ, VSX-LX…); Grace Digital; Logitech Squeezebox; NAD.
Setup · route A

Type it into the receiver

Find the network settings, switch the IP to manual and put our address in the DNS field. Where to go by brand:

Denon /
Marantz
Setup → Network → Connection → set “IP Address = Manual” → leave IP/mask/gateway as they are → in DNS enter our address → Save
YamahaSetup → Network → “IP Address” → Manual → in the DNS field enter our address
Onkyo /
Integra
Setup → Hardware → Network → turn off “DHCP” → in DNS enter our address → Save
PioneerMenu → Network Setup → “IP Address” → Manual → in DNS enter our address
Table radios
(Roberts, Pure…)
Table radios usually have no DNS field — enter the address in your router instead (route B).
💡 Tip: enter it in the receiver itself — then only the receiver changes and every phone or computer in your home keeps working as before.
Setup · route B

Or set it in the router

If the radio has no DNS field, open your router (usually 192.168.0.1 or 192.168.1.1 in a browser) and set our address as the DNS for your home network.

TP-LinkAdvanced → Network → DHCP Server → “Primary DNS” → our address → Save
ASUSLAN → DHCP Server → “DNS Server 1” → our address → Apply
KeeneticHome network → “Name servers (DNS)” → our address → Save
Any otherLook for “Home network” or “DHCP” → the “DNS” field → enter our address → save and restart the radio.
⚙️ Route C — for advanced users (Pi-hole, OpenWrt, MikroTik, AdGuard, pfSense)

Redirect only the radio domains and leave the rest of your traffic untouched. Copy the block for your system.

OpenWrt
dnsmasq — /etc/dnsmasq.d/radio.conf
Pi-hole — /etc/dnsmasq.d/05-radio.conf
AdGuard Home — DNS rewrites
MikroTik
Final step

Check that stations are back

Power the receiver off and on (or reconnect it to the network), then open Online Music → Internet Radio. The list should come alive. If it's still empty, re-check that the address is typed correctly and that the receiver gets its settings from your router.

Pricing

Free to start. Fair to keep.

Every receiver gets a full month free. After that, a small donation keeps the servers and the station list running.

First 30 days
Free
  • Full station directory
  • Genres, countries, languages
  • No account, no app
After the trial
Donate
  • Everything in the trial
  • Keeps your receiver online
  • Supports an independent project
Activate

Enter your device code

When the trial ends, your receiver shows a 6-character code. Type it here to check status.

FAQ

Good to know

Is this legal?

Yes. Retune FM only links to publicly available radio streams — no audio is copied or re-hosted. It is an independent project, not affiliated with any manufacturer or the former vTuner service.

Do I need to install anything?

No. You change one network setting on the receiver itself. There is no app, no account and no computer involved.

Will it slow down my other apps?

No. The DNS only redirects the old radio-directory address. All other services and streaming apps keep working normally.

How do I undo it?

Set the receiver's DNS back to automatic (or your router's address). Everything returns to how it was.